-
Morris DOT 4 Brake Fluid. Made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality. The product is blended with special additives that prevent fluid oxidation, rust and the swelling of the piston seals used in conventional brake systems. Manufactured to exceed vehicle manufacturer’s standards and has been designed for use at high temperatures under the most severe conditions. This fluid is compatible with all other non-mineral brake fluids manufactured to the same specifications. Applications: Morris Brake Fluid is suitable for use in all brake and clutch systems where a non-mineral oil grade has been specified meeting the performance levels listed below. Always check manufacturer’s handbooks for the correct fluid type as mis-application will impair brake operation and pose a threat to vehicle safety. Performance Levels: Morris Brake Fluid is designed to exceed the following specifications. U.S. Federal Motor Vehicle Safety Standard FMVSS 116 DOT 3 and DOT 4 U.S. Society of Automotive Engineers SAE J 1703 and J 1704 International Standards Organisation ISO 4925 (Classes 3 & 4) Japanese Industrial Standards JIS K 2233 -
Morris EP 80W-90 Gear Oil. EP 80W-90 Gear Oil is a mineral oil based lubricant formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems. This grade has a high level of extreme pressure (EP) additive that provides effective gear protection over a range of temperatures and shock load conditions. EP 80W-90 Gear oil will also protect components from rust and corrosion. Applications: EP 80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc. -
Morris EP85-140 Gear Oil A mineral oil based lubricant formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems. High level of extreme pressure (EP) additive that provides effective gear protection over a range of temperatures and shock load conditions. EP 85W-140 Gear oil will also protect components from rust and corrosion. Applications: EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc. -
Morris Golden Film Classic Gear Oil AG90 Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability. Applications: Golden Film AG Gear Oils are suitable for use in equipment where the manufacturer specifies a non-EP lubricant. Applications include: manual gearboxes (e.g. Eaton/Fuller, Volvo), axles, worm gear drives (e.g. GKN), oil lubricated bearings, reduction gears/hubs, chains, steering boxes, king-pins, etc. Additionally, Golden Film AG Gear Oils are safe for use in transmissions that contain phosphorbronze components. This makes them ideal for classic and vintage cars, motorcycles, tractors, traction engines and commercial vehicles. -
Morris Golden Film Classic Motor Oil SAE 20W-50 A specialist high quality, low detergent/dispersant multigrade lubricant. This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines. Applications: Recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern high additive level oils. Golden Film SAE 20W-50 Classic Motor Oil is a low dispersant oil and allows any solid contaminants to drop harmlessly into the sump. This is an important feature where early methods of oil filtration, such as mesh gauzes or strainers are fitted. The multigrade properties of Golden Film SAE 20W-50 provide improved cold start circulation whilst maintaining good working oil pressure. -
Morris Golden Film Classic Motorsport Oil 15W-50 Manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines, but may also be used in older diesel units. Will keep engine components clean and deposit free, as well as protecting against wear, rust and corrosion. This grade is ideal for engines starting to suffer from high consumption or reduced oil pressure. An ideal choice for classic and vintage cars that are raced competitively. This grade has been proven on the track and will provide impressive oil pressure and bearing protection under high load and high temperatures. Makes include: Mini, MG, Austin Healey, Jaguar, Ford, Aston Martin. Also recommended for well maintained, high mileage engines, where oil consumption is starting to increase. Golden Film Classic Motorsport SAE 15W-50 is also suitable for older engines (1950’s, 1960’s) that have been rebuilt and a full flow cartridge filter has been added. -
Morris Grease Cartridge 400g K2EP Long Life Lithium Premium quality multi-purpose lithium complex grease for lubricating all anti-friction and plain bearings for use in industrial and automotive applications. Highly adhesive grease has shown exceptional performance providing extended lubrication intervals, even under arduous conditions and over wide operation temperature range. Features: Exceptional mechanical stability extends re-lubrication intervals. Excellent oxidation stability provides lasting lubrication at high temperatures. Excellent EP and anti-wear performance. Good corrosion resistance protects components operating in wet conditions. Applications: Developed for use in wheel and other bearings and as a multipurpose grease for cars, vans, trucks, buses, coaches and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance. It is also recommended for use in industrial equipment operating at high temperatures. -
Morris Grease Cartridge 400g K323 Premium Blue An extremely sophisticated lithium/calcium base grease which incorporates modern polymer technology. High level of water tolerance, mechanical stability and adherence. Exceptional load carrying ability and will cope with constant high levels of loads and shock loading. Wide application temperature range makes it ideal for a multitude of what are normally considered difficult applications, especially in both fresh and salt water saturated environments or where rubbing surfaces tend to remove ordinary grease coatings. Features: • High degree of water resistance. • Good corrosion resistance protects components operating in wet conditions. • Excellent EP and anti-wear performance. Applications: Recommended for automotive, agricultural, industrial and marine applications where such items as high loads, water wash out and abrasive wear have been a recognised problem. K323 has proven itself in heavily loaded trailer bearings and provides continued protection in wheel ‘lock up’ situations under harsh braking, allowing for timely bearing inspection, and therefore reducing the likelihood of damage or failure in use. Also ideal for vibratory bearings on compacting equipment and as a chuck grease provides exceptional lubricating properties and resistance to wash off by water based cutting fluids. -
Morris Grease Cartridge 400g K42EP Multi Purpose • This Lithium grease is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. • Particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads. • Made from highly refined mineral oil, with the addition of powerful sulphur phosphorus extreme pressure additives. • Exceptional mechanical stability, maintaining their consistency even after severe working. -
Morris Ground Force 2 Stroke Engine Oil 2HSS A top quality synthetic boosted 2-stroke oil, utilising the latest performance additive technology, for protection and performance. Provides maximum film strength and anti-wear characteristics, for prolonging engine life. Low smoke, clean burning lubricant and reduces the need for maintenance on ports and exhausts. Provides all season reliability for modern 2-stroke engines when used in horticultural or plant equipment. Developed to meet the need for a specialised product for horticultural contractors and hired equipment where a certain amount of severe treatment has to be catered for and where adherence to mixtures ratios cannot be guaranteed. Applications: Groundforce 2HSS has been formulated for use in the engines of all two stroke powered horticultural equipment. This includes mowers, chain saws, chippers, shredders, scarifiers, weed cutters, strimmers and hedge cutters. Can also be used in other air-cooled engines powering abrasive disc cutters, angle grinders and general 2-stroke hire equipment. For premix the mixing process and ratios should be as detailed in the manufacturers handbook. Can also be used via a direct injection system. -
Morris Ground Force 2 Stroke Universal Oil 2T Developed to meet the requirements of small high revving air cooled 2-stroke engines in horticultural and agricultural equipment. The lubricating film is strong enough to prevent engine lock up in moments of temporary overheating and provides maximum film strength and anti-wear performance. Reduced smoke and clean burning characteristics mean that deposit formation in the ports and exhaust are virtually eliminated. Applications: Groundforce 2T is designed for use in the engines of two stroke powered equipment. This includes chain saws, abrasive disc cutters, angle grinders, chippers, shredders, hover mowers, scarifiers, weed cutters, strimmers and hedge cutters. -
Morris Ground Force 4 Stroke Engine Oil SAE 10W-40 Designed to cope with the difficult conditions found in four stroke diesel and petrol engines fitted to horticultural, garden machinery and stationary equipment where multigrade oils are recommended. Blended from solvent refined base stocks and performance additives to control vanish, soot dispersancy, low temperature sludge, oxidation, rust and corrosion. Suitable for all year round use. Applications: Designed for use in all horticultural 4 stroke engines, both diesel and petrol where an oil of this quality is required. Approved and endorsed by the British Agricultural & Garden Machinery Association.
CAMBERS HARLEY
CAMBERS HINSTOCK
CAMBERS TATTENHALL
SHOPPING ONLINE
ABOUT US
